Bright Annealed Wire For Airbag
Size：0.2-0.9mm
Packing： Coil， Spool
RAW MATERIAL
Coil rod: 1006, 1008, 1018, Q195, etc.1006, 1008, 1018, Q195 WIRE ROD.
Automobile airbag generator with anaerobic filament
Specifications: 0.2mm, 0.25mm, 0.4mm, 0.45mm, 0.51mm, 0.70mm, 0.9mm;
Partner: Fuji filter industry co., LTD.DSST
Purpose: to control airbag gas injection;
Requirements: tensile strength: 300-450n /mm2;Line diameter tolerance +/-0.005mm;Uniform strength line and diameter requirements;
Packing: the packing method adopted in Japan is FB500 shaft, 500kg per shaft.Usage: after flattening the wire, it is twisted into a Z2 type cylinder, with a height of about 10CM and a weight of about 90g.And then it's fired;The finished product is covered in the outer edge of the explosion generator and installed on the car. When the car is hit hard, the instantaneous blasting will occur. The gas will pass through the gap between the wire evenly and quickly, and the air bag will be blown up.
Dosage: 0.51mm oxygen-free filament is the specification with the highest current consumption of Fuji and Thailand DSST, about 200 tons per month;Most are still in Japan.
Hot Tags: anaerobic wire, China, suppliers, manufacturers, factory, made in China, Galvanized Wire For Nail Making, Oxygen Free Annealing Wire, Black Annealed Wire, Electro Galvanized Wrie, Fruit Silk Bag, Electro Galvanized Wire For Armoured
